Maximum Torque Specialists Cadillac Forums  

Go Back   Maximum Torque Specialists Cadillac Forums > Cadillac Tech > Transmissions and drive-trains

Transmissions and drive-trains Troubleshoot, repair, rebuild.

Reply
 
Thread Tools Display Modes
Old 02-18-2013, 01:20 PM   #1
Psychoholic
Junior Member
 
Join Date: Jul 2005
Location: Atlanta
Posts: 3
Send a message via AIM to Psychoholic
Default 2 questions - torque converter and rear end.

I've got a 72 Caddy commercial chassis and a slightly built 472 in it (all parts from MTS a LONG time ago), I'm having the transmission rebuilt right now and was thinking of swapping in a new converter in but I want to make sure I'm getting a reasonable stall speed - does anybody know what the stock RPM stall was for this year/car?

Other question - what parts interchange to turn that commercial chassis rear end into a limited slip?
Psychoholic is offline   Reply With Quote
Old 05-08-2013, 11:44 AM   #2
~JM~
Senior Member
 
Join Date: May 2005
Posts: 365
Default

Most likely a fairly low stall speed in the 1800 RPM range, I'm guessing. Big torque engines do not need much stall speed. I used an extra low stall speed Allison spec RV type of TC in my Jeep & it was rated at 1100 RPM.

You might want to contact MTS with your cam specs & see what stall speed they recommend.

~JM~

Last edited by ~JM~; 05-08-2013 at 12:12 PM.
~JM~ is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 09:20 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.