View Single Post
Old 02-17-2013, 11:24 PM   #6
cosmiccadillac
Junior Member
 
cosmiccadillac's Avatar
 
Join Date: Feb 2012
Location: New Hampshire
Posts: 4
Default

I don't know if it would work since you have AC, but I just made some aluminum spacers to bump the power steering pump out to line up the next groove. Then, you only have 2 belts, and both are adjustable. One that goes around the crank/water pump/power steering pulleys, and one from the water pump to the alternator. I had run a belt like the red one in the drawing, you can install it by getting it most of the way on and cranking the motor over for a second, it'll jump right on
__________________
68 Coupe DeVille, chopped, shaved, bagged, home-ground whitewalls, lots of fun! Freshly rebuilt 472 w/#10 cam and shaft mounted roller rockers, polished Edelbrock intake, smoothed block and heads, smoothed lifter galley walls

Last edited by cosmiccadillac; 02-17-2013 at 11:31 PM.
cosmiccadillac is offline   Reply With Quote